How to Duplicate Keys
When you need an extra key, you might want to try to duplicate it yourself. This is normally not a wise move, but you can try it when you have the time and the technical skill. The materials you’ll need for this task are a vice and a file. You’ll also need a lot of patience as this process can take a while.
First, you need to put both the original and blank keys together in the vice so the original can be used as a pattern for the duplicate. You must be sure the key is placed properly so it won’t fall off during the process. The vice should be tightened so the task would go along smoothly. After that, you can begin filing down the blank one to the height of the tallest “mountain” on the original. One important thing to remember is to not scrape any metal off the original key or you might end up destroying it. Therefore, you must already have a duplicate before doing this task.
After double checking, if the keys are lined up, you must start filing the valleys. The last thing to do now would be to test the key if it would work on the purpose of the original one. If it doesn’t work, you can fine tune it again. It may take a few minutes of fine tuning before the key will finally work. You can repeat the process to get lots of duplicates.
Once you’ve realised how hard it is to duplicate keys by yourself, it would be better to leave this task to the professionals.They use state-of-the-art equipment in the key cutting process so mistakes can be avoided. Their team of locksmiths is always looking to expand their knowledge by attending relevant training.
Car Keys Melbourne is also available 24 hours a day in case of emergency lockout situations. You can visit www.carkeysmelbourne.com.au to find out more and get reliable services.